Page Not Found
The page you have requested is not available.
Search
This is the 4 Screws that fasten the Top Cover to the Side Straps of the CI Cutter. They are also the same screws that hold the Upper Guard to the Top Cover, and the Lower Guard to the Side Block. SKU: CU20134
|
||
This is the 8 Screws that fasten the Bearing Holders to the Side Straps and the Side Straps to the Side Blocks. SKU: CU20133
|
||
This is the Drive Sprocket with the Steel Bushing with pins and the Steel Bushing without pins and the 4 screws to fasten them in the cobs and to the shaft. SKU: CU20132
|
||
This is the original 14" Bar and Chain for the Makita. You can simply take the Cutter-head off of the Makita and install the Bar and Chain if you need a chainsaw. This is NOT the bar or chain... SKU: CU20129
|
||
This is the Sprocket on the Makita Power-head that drives the chain. SKU: CU20117
|
||
This is the complete Makita Power-head. It has the Custom Filter installed and all other necessary modifications done to it. The Power-head was updated on 10/15/2015 and it requires... SKU: CU20113
|
||
This is the power cord for the Makita Power-Head. SKU: CU20126
|
||
Attachment for Drill for trimming tight areas and other touch-up trimming. SKU: CU20125
|
||
This is the complete Side-cover for the Makita Power-head. It has the chain tightening system in it also. The Makita Power-head was updated on 10/15/2015 so you will need to specify... SKU: CU20123
|
||
These Depth Control Wheels mount on the ends of the Cutter Head and allows the user to plane off high places in the foam between the Wheels. Excellent for seams or patched spots on roofs,... SKU: CU20124
|